amavisd-milter(8) manual page
NAME
amavisd-milter -- sendmail milter for amavisd-new
SYNOPSIS
amavisd-milter [-Bfhv] [-d debug-level] [-D delivery-care-of]
[-m max-conns] [-M max-wait] [-p pidfile] [-P]
[-q backlog] [-s socket] [-t timeout] [-S socket]
[-T timeout] [-w directory]
DESCRIPTION
The amavisd-milter is a sendmail milter (mail filter) for amavisd-new
2.4.3 and above and sendmail 8.13 and above (limited support for 8.12 is
provided).
Instead of older amavis-milter helper program, full amavisd-new function-
ality is available, including adding spam and virus information header
fields, modifying Subject, adding address extensions and removing certain
recipients from delivery while delivering the same message to the rest.
For more information you can visit amavisd-milter website:
http://amavisd-milter.sourceforge.net/
and SourceForge project:
http://sourceforge.net/projects/amavisd-milter
Options
The options are as follows:
-B Uses {daemon_name} macro as a policy bank name (see POLICY BANKS
below).
-d debug-level
Set the debug level to debug-level. Debugging traces become more
verbose as the debug level increases. Maximum is 9.
-D delivery-care-of
Set AM.PDP request attribute delivery_care_of to client (default)
or server. When client method is used then amavisd-milter is
responsible to forward the message to recipients. This method
doesn't allow personalized header or body modification.
When server method is used then amavisd-new is responsible to
forward the message to recipients and can provide personalized
header and body modification. $forward_method in amavisd.conf
must point to some place willing to accept mail without further
checking in amavisd-new.
-f Run amavisd-milter in the foreground (i.e. do not daemonize).
Print debug messages to the terminal.
-h Print help page and exit.
-m max-conns
Maximum concurrent amavisd connections (default 0 - unlimited
number of connections). It must agree with the $max_servers
entry in amavisd.conf.
-M max-wait
Maximum wait for connection to amavisd in seconds (default 300 =
5 minutes). It must be less then sending MTA timeout for a
response to the final "." that terminates a message on sending
MTA. sendmail has default value 1 hour, postfix 10 minutes and
qmail 20 minutes. We suggest to use less than 10 minutes.
-p pidfile
Use this pid file (default /var/amavis/amavisd-milter.pid).
-P When amavisd-new fails mail will be passed through unchecked.
-q backlog
Sets the incoming socket backlog used by listen(2). If it is not
set or set to zero, the operating system default is used.
-s socket
Communication socket between sendmail and amavisd-milter (default
/var/amavis/amavisd-milter.sock). The protocol spoken over this
socket is MILTER (Mail FILTER). It must agree with the
INPUT_MAIL_FILTER entry in sendmail.mc
The socket should be in "proto:address" format:
o {unix|local}:/path/to/file - A named pipe.
o inet:port@{hostname|ip-address} - An IPV4 socket.
o inet6:port@{hostname|ip-address} - An IPV6 socket.
-S socket
Communication socket between amavisd-milter and amavisd-new
(default /var/amavis/amavisd.sock). The protocol spoken over
this socket is AM.PDP (AMavis Policy Delegation Protocol). It
must agree with the $unix_socketname entry in amavisd.conf.
The socket should be in "proto:address" format:
o {unix|local}:/path/to/file - A named pipe.
-t timeout
sendmail connection timeout in seconds (default 600 = 10 min-
utes). It must agree with the INPUT_MAIL_FILTER entry in send-
mail.mc and must be greater than or equal to the amavisd-new con-
nection timeout. When you use other milters (especially time-
consuming), the timeout must be sufficient to process message in
all milters.
-T timeout
amavisd-new connection timeout in seconds (default 600 = 10 min-
utes). This timeout must be sufficient for message processing in
amavisd-new. It's usually a good idea to adjust them to the same
value as sendmail connection timeout.
-v Report the version number and exit.
-w directory
Set working directory (default /var/amavis).
Limited support for sendmail 8.12
o smfi_addheader() is used instead of smfi_insheader() for insheader
and addheader AM.PDP responses. This works well with amavisd-new
2.4.3 or newer.
o smfi_progress() isn't called when amavisd-milter wait for amavisd-new
communication socket.
o AM.PDP response quarantine isn't implemented.
FILES
/var/amavis/amavisd-milter.pid
The default process-id file.
/var/amavis/amavisd-milter.sock
The default sendmail communication socket.
/var/amavis/amavisd.sock
Th default amavisd-new communication socket.
/var/amavis
The default working directory.
POLICY BANKS
If the option -B is enabled, amavisd-milter uses the value of the milter
macro {daemon_name} as a name of the amavisd-new policy bank. Usualy this
milter macro is set to name of the MTA.
When remote client is authenticated, amavisd-milter uses this information
as a name of the amavisd-new policy banks:
SMTP_AUTH
Indicate that the remote client is authenticated.
SMTP_AUTH_<MECH>
Remote client authentication mechanism.
SMTP_AUTH_<MECH>_<BITS>
The number of bits used for the key of the symmetric cipher when
authentication mechanism use it.
EXAMPLES
Configuring amavisd-new
In amavisd.conf file change protocol and socket settings to:
$protocol = "AM.PDP"; # Use AM.PDP protocol
$unix_socketname = "$MYHOME/amavisd.sock"; # Listen on Unix socket
### $inet_socket_port = 10024; # Don't listen on TCP port
Then (re)start amavisd daemon.
Configuring sendmail
To the sendmail.mc file add the following entries:
define(`confMILTER_MACROS_ENVFROM',
confMILTER_MACROS_ENVFROM`, r, b')
INPUT_MAIL_FILTER(`amavisd-milter',
`S=local:/var/amavis/amavisd-milter.sock,
F=T, T=S:10m;R:10m;E:10m')
Then rebuild your sendmail.cf file, install it (usually to
/etc/mail/sendmail.cf) and (re)start sendmail daemon.
Running amavisd-milter
This example assume that amavisd-new is running as user amavis. It must
agree with the entry $daemon_user in amavisd.conf.
First create working directory:
mkdir /var/amavis/tmp
chmod 750 /var/amavis/tmp
chown amavis /var/amavis/tmp
Then start amavisd-milter as non-priviledged user amavis:
su - amavis -c "amavisd-milter -w /var/amavis/tmp"
Limiting maximum concurrent connections to amavisd
To limit concurrent connections to 4 and fail after 10 minutes (10*60
secs) of waiting run amavisd-milter with this options:
su - amavis -c "amavisd-milter -w /var/amavis/tmp -m 4 -M 600"
Troubleshooting
For troubleshooting run amavisd-milter on the foreground and set debug
level to appropriate level:
su - amavis -c "amavisd-milter -w /var/amavis/tmp -f -d level"
where debug levels are:
1 Not errors but unexpected states (connection abort etc).
2 Main states in message processing.
3 All amavisd-milter debug messages.
4-9 Milter communication debugging (smfi_setdbg 1-6).
SEE ALSO
http://amavisd-milter.sourceforge.net
http://www.ijs.si/software/amavisd/
http://www.milter.org/developers
http://www.sendmail.org
AUTHORS
This manual page was written by Petr Rehor <rx@rx.cz> and is based on
Jerzy Sakol <jerzy.sakol@commgraf.pl> initial work.
BUGS
A community mailing lists are available at:
http://sourceforge.net/mail/?group_id=138169
Enhancements, requests and problem reports are welcome.
If you run into problems first check the users mailing list archive
before asking questions on the list. It's highly likely somebody has
already come across the same problem and it's been solved.
Man(1) output converted with
man2html